Perhaps every car enthusiast faced this problem at least once, after choosing the first car in his life. Today we will give some tips on how to update it yourself. Oil does not change at any moment, but only when necessary. In order to accurately determine the right time, follow some tips.
First of all, the fuel consumed by your car affects the need for an oil change. Every day you drive at least 100 kilometers, and even at a rather high speed? Then you will have to change the oil approximately every 6 to 10 thousand kilometers. With a daily car mileage of about 100 kilometers and vigorous driving, the oil is changed once every 6-10 thousand kilometers. All the tips in the manual are based on statistics and by default assume the maximum load on the car, such as low-quality fuel, frequent downtime, transportation of heavy loads, a lot of driving in traffic jams.
In any case, regardless of the manufacturer, when buying a used car, do not forget to change the oil before starting operation. When buying a used car, immediately change the filters: fuel and air and liquids: cooling and brake. The replacement process can be divided into the preparatory phase and the immediate work.
At the preparatory stage you need to:
Stock up on new oil and filter.
Find a drain tank for waste fluid. Use a cut canister, basin or other container made of plastic, metal of suitable volume.
Buy or find a special key to drain the oil through the underbody.
Completing of the work
Identify a place convenient for work. A flyover, repair pit is suitable for this.
Place a container under the drain plug.
Know that you can get burned while running on an engine that is too hot.
After the engine has completely drained oil, screw the cover back on.
Next, remove the oil filter.
He often sticks, which is why he turns away poorly.
You can pierce it with a thick screwdriver and drop it by applying the principle of the lever, but it will be much more correct to use a special key with which you can dismantle it without any problems.
Install a new oil filter to replace the old one.
To prevent damage to the filter, lubricate the rubber o-ring with engine oil in advance.
The last step involves adding new oil.
Do not forget that you need to fill the oil to the middle position of the level on the dipstick.
Do not rush so as not to fill in the excess. Wait until it spreads over all voids, if necessary, add more.
The used oil must be disposed of and the filter discarded.
Warm up the engine and let it cool again.
Check engine oil level; top up if necessary. List of USA lawyers https://officialsusa.com/role/lawyers